Triumph MOSFET Regulator-Rectifier Daytona 600 675 Tiger 955i 1050 Speed Triple

Triumph MOSFET Regulator-Rectifier Daytona 600 675 Tiger 955i 1050 Speed Triple
Triumph MOSFET Regulator-Rectifier Daytona 600 675 Tiger 955i 1050 Speed Triple
Triumph MOSFET Regulator-Rectifier Daytona 600 675 Tiger 955i 1050 Speed Triple
Triumph MOSFET Regulator-Rectifier Daytona 600 675 Tiger 955i 1050 Speed Triple

Triumph MOSFET Regulator-Rectifier Daytona 600 675 Tiger 955i 1050 Speed Triple

Get a more stable charging voltage, prolonged service life and lower working temperature, this is the end of your battery charging problems. Straight-forward plug-and-play fitment for most Triumph models, including Daytona 600, 675, Tiger 955i, 1050 all models. Distance between the fastening M6 bolts, center-to-center: 75-83mm. Wire length including connectors: 25cm. Please refer to the photos for terminal connectors layout.

Bike-side harness connectors also included. It will also fit any motorcycle model that features a 3-phase alternator with a magnetic rotor with an output up to 500W/50Amp and a 7 or 5 wire connector. However, fitting on other models other than those stated will probably require modifying the connectors (bike-side connectors included) or direct soldered wiring (recommended). Fitting instructions and charging system diagnose and repair tips and tricks included.

Please state your bike model and year before or at the same time with your order and I will perform a cross-reference double-check to ensure fitment and model specific particularities. Before fitting it to your bike, make sure that the connectors on the bike side are free from corrosion or burnt marks, especially the 3 AC output wires from your alternator (yellow or white wires on most motorcycles, black on many triumph models) which work at high amperage.

The black or green ground wires should have 0 resistance to ground. Measure the AC voltage output of your alternator before fitting the new charger. Ensure that all the connectors are firm and good and have no significant resistance, as faulty connections will damage the rectifier.

If in doubt it is safer to clip off all connectors and directly solder the wires. Enjoy your ride and thumbs up for voltage!

Seeing where you're going and never to be left in the dark again will really improve your biking life! OEM PART REPLACEMENT CODES T1300560 AND T1304040. This item is in the category "Vehicle Parts & Accessories\Motorcycle Parts\Electrical & Ignition Parts\Regulators".

The seller is "qwick_moto_revival" and is located in this country: GB. This item can be shipped to United Kingdom, Antigua and Barbuda, Austria, Belgium, Bulgaria, Croatia, Republic of, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Brazil, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, Korea, South, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei Darussalam, Cayman Islands, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French Guiana, Iceland, Jersey, Jordan, Cambodia, Saint Kitts-Nevis, Saint Lucia, Liechtenstein, Sri Lanka, Macau, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and Caicos Islands, Aruba, Saudi Arabia, South Africa, United Arab Emirates, Ukraine, Chile, Bahamas, Colombia, Costa Rica, Dominican Republic, Guatemala, Honduras, Jamaica, Kuwait, Panama, Philippines, Qatar, El Salvador, Trinidad and Tobago, Uruguay, Vietnam, Russian Federation.

  • Machine Type: Dual Sport Motorcycle, Street Motorcycle
  • Reference OE/OEM Number: T1304040
  • Other Part Number: T1300560
  • Brand: Unbranded


Triumph MOSFET Regulator-Rectifier Daytona 600 675 Tiger 955i 1050 Speed Triple